Share:
Specifications
Outside Diameter: 1.90-5.17 inches
depending on model
selected. inch, 48.26-
131.31 mm depending
on model selected. mm
Length: 3.55-11.5 inches
depending on model
selected. inch, 90.10-
292.10 mm depending
on model selected. mm
Operating Temperature: 195 °F, 90 °C
Mounting Type: Threaded ID
Bypass Valve Pressure Rating: none, 3 psi
Flow Rate: 19-380 lpm depending
on model selected.
L/min
Housing Material: Nylon, Steel, Steel
Suction elements are designed to protect the pump and system from fluid contamination.
These strainers are intended to be located inside the reservoir, fully submersed in the fluid.
Due to cavitation limitations of pumps, Parker strainers are comprised of relatively coarse
media in either 150µ or 560μ absolute stainless steel wire mesh media. For this reason, they
are not used as primary protection against contamination. Also available to further protect
against cavitation, Parker suction strainers are offered with integrated 3psid by-pass valve
and ceramic magnets options.
*Always consult the pump manufacturer for inlet restrictions
Inquiry - Reservoir Accessories - Suction Strainers
